SOLVING A BIG DISINFECTION PROBLEM AT A SMALL WATER RECLAMATION PLANT

The 4.5 MGD Yucaipa Valley Water District Water Reclamation Plant was experiencing chronic difficulties in meeting a stringent coliform limit, despite high chlorine doses (up to 35 mg/l), 10- 15 mg/l residuals, and low effluent turbidity (30 mkm) was occurring through the chlorine contact tanks, indicating that solids were settling in the contact tanks. Concurrently, particle testing conducted at the start of tertiary filter backwashes indicated that large particles from the bottom of the contact tanks were “stirred up” by backwash supply pumping. Interestingly enough, poor coliform results often coincided with the occurrence of tertiary filter backwashes. The team postulated that the occurrence of large particle solids settling in the contact tanks and the subsequent “stirring up” of these solids during tertiary filter backwashes could be a significant cause of inadequate disinfection.The team hypothesized that an increase of the number of small particles in the filter effluent may be a consequence of biological growth within the gravity filters. To prevent biological growth and to reduce the number of small particles, the injection point of ammonia for chloramination was relocated from the filter influent to the filter effluent. Subsequent testing revealed that the number of small particles leaving the filters no longer exceeded the number of particles entering the filters, and accumulation of large particles in the chlorine contact tank was significantly reduced. To date, effluent turbidities consistently average 0.5 NTU, and consistent coliform compliance has been met.